Inter-Tel Analog Endpoint, User Manual

Page: 29 / 116

17
Inter-Tel
®
Analog Endpoint User Guide
GETT
ING ST
ART
E
D
•
To block the call from coming through the speaker:
— Press to allow the incoming call to camp on. The button
flashes, and the caller is placed on hold.
— Press to place your endpoint in DND mode, if desired. (See page 37
for more information about DND mode.)
Outside Calls
With outside calls, you can talk to people who aren’t members of your telephone sys-
tem. When you make an outside call, however, you must dial any area codes or long
distance digits that your telephone company requires.
Placing Outside Calls
To place an outside call:
1.
With or without the handset lifted, press ,.
2.
Dial the desired number.
NOTE:
If you see a request for an account code and hear a single beep, you must
dial an account code before you can place your call (see page 60 ).
Depending on how your system is programmed, you may be able to use one of the
following methods to select an outgoing line, instead of pressing
:
•
Dial the Outgoing Call feature code (default is 8).
•
Press an unlit
CALL
button, if you have one.
•
Press an unlit
LINE
button, if you have one.
•
Dial a Select Line Group feature code (defaults are 92001-92208 but may differ
depending on the software version).
•
Dial the Automatic Route Selection (ARS) feature code (default is 92000 but
may differ depending on the software version).
To request a callback (queue on to the line) if all outgoing lines are busy when you
try to call out:
Press when you hear busy signals and hang up. When the line is available, your
endpoint rings.
To cancel the queue request before your endpoint rings:
Press .
When dialing the number, you can do one of the following:
•
Use the speed-dial directory. See page 62 .
•
Use the Station Speed-Dial feature. See page 52 .
•
Use the System Speed-Dial feature. See page 54 .
•
Redial the last number you dialed. See page 24 .
SPKR IC
DND
OUTGOING
OUTGOING
6
6