16
6 Change the address of CCD camera
CCD camera address is minus 1 of thermal camera, it means CCD camera has the same address as PT
system
Open housing of CCD camera. Pressing the
『
SETUP
』
button(refer to Pic 9) on the rear of CCD camera
about 2 seconds to popup the menu of the camera. Refer to Pic 10
Pic 9 Pic 10
Pressing
『
SETUP
』
switch
(up or down),move up or down on the menu to “COMMUNICATION”.
And press
『
SETUP
』
switch to enter “COMMUNICATION” menu, shown as Pic.11.
1.
Protocol
Must be PELCO-D; otherwise the CCD camera
cannot be controlled.
2.
BaudRate
Must be 9600; otherwise the CCD imaging camera
cannot be controlled.
3.
ADDRESS
Setup the camera’s address.
Moving cursor to
and pressing
『
SETUP
』
switch to exit the
menu. Before exiting the setup screen, select
『
SAVE
』
to save your settings. Pic.11
