Intellisystem IT-600-IPC Series User Manual Download Page 88

Page: 88 / 131

data at the same time. As well as the computer connect to the PoE/PSE, it can log in connected tester's

PoE camera.

3.3.25 12V power input test

Connect 12V power adaptor to tester’s charging port, then click icon “PoE” to enter voltage

measurement app ,screen show the current adaptor input voltage and power. Note: the current

12V input measured power is the battery charging power and the device working power, the

measured power will change depending on the different of battery power and backlight

brightness.

Warning: Not allow connect device with input power over 17V to tester “12V IN“ port,

otherwiseit will damage the machine.

Summary of Contents for IT-600-IPC Series




































































































































Search results

Summary of Contents for IT-600-IPC Series

Reviews:

Related manuals for IT-600-IPC Series

Brands by name

Popular brands

Intellisystem IT-600-IPC Series, User Manual

Search results

Summary of Contents for IT-600-IPC Series

Reviews:

Related manuals for IT-600-IPC Series

Brands by name

Popular brands