IntelliSense and SpreadNet are registered trademarks of
Honeywell, Inc.
All other trademarks are the property of their respective owners.
Copyright 2001 IntelliSense. All Rights Reserved
5-051-568-00 Rev. B
FCC NOTICE
The Model SN982-SMOKE Smoke Detector Transmitter generates and uses
radio frequency energy. If not installed and used in accordance with the man-
ufacturer's instructions, it may cause interference to radio and television recep-
tion. The SN982-SMOKE Smoke Detector Transmitter has been tested and found
to comply with the specifications in Part 15 of FCC Rules for Class B Computing
Devices and FCC Part 15 Subpart C, Specifications for Intentional Spread
Spectrum Radiators.
If this equipment causes interference to radio or television reception - which can
be determined by turning the equipment on and off - the installer is encouraged
to correct the interference by one or more of the following measures: 1) Reorient
the antenna of the radio/television. 2) Relocate the SN982-SMOKE transmitter
with respect to the radio/television.
If necessary, the installer should consult an experienced radio/television tech-
nician for additional suggestions.
CAUTION:
IntelliSense does not support field changes or modifications to any
of the SpreadNet RF equipment unless they are specifically covered in this manual.
All adjustments must be made at the factory under the specific guidelines set forth
in our manufacturing processes. Any modification to the equipment could void the
user's authority to operate the equipment and render the equipment in violation of
FCC Part 15, Subpart C, 15.247.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
INDUSTRY CANADA
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference Regulations
of Industry Canada.
This device complies with RSS-210 of Industry Canada. Operation is subject
to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference including interference that may
cause undesired operation of the device.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant
les limites applicables aux appareils numériques de Classe B prescrites dans
le Règlement sur le brouillage radioélectriques édicté par le ministère des
Industrie Canada.
4
