IntelliSAW IRM-48 Reader
Installation Manual
Page 13 of 28
IRM-48 Reader
910.00371.0001
Figure 6: Horizontally Installed Din Rail Mounted Reader
Figure 7: Vertically Installed Din Rail Mounted Reader
3.3.1
Installation Location
The IRM-485 Reader is intended for installation in LV compartments of switchgear, other
electrical assets, or in weather protected enclosed locations. The Reader is required to be
installed within 7m of the Air Interface, the maximum length of the Air Interface Antenna RF
cable.
3.3.2
Recommended Spacing
It is recommended to allow up to 5 cm (2 in.) for the IRM-48 Reader connectors. It is best to
have the USB connector easily accessible.
