Network Video Recorder
UI System Setting
User Manual
Issue: V4.6 (2021-05-12)
119
Parameter
Description
Setting
Mapping point
You need map three points at
two channels. Points are
correspond of each.
The three points should cover
most areas, and two points are
located in the diagonal display
of the picture.
Point one is green cross.
Point two is red cross.
Point three is blue cross.
[Setting method]
Select from drop list .
7.1.8.3
Thermal Calibration
Figure 7-13
Thermal calibration
Table 7-7
Thermal calibration
Parameter
Description
Setting
Display area
information
Enable to show the information
of displaying area.
[Setting method]
enable