48-Port Gigabit Ethernet PoE+ Managed Switch with Four 10G SFP+ Uplinks
User Manual
37
【
P
ARAMETER
D
ESCRIPTION
】
6.1.7.2
Stacking Configuration
Selecting
Basic Setting
>
Stacking
>
Stacking Configuration
in the navigation bar lets you open a
stack and set System Priority.
Parameter
Description
Slot
Each device in the system must manually specify an unrepeatable
ID number, unique identity
Status
Two different working modes:
Single-machine mode: this mode is the same as the general switch,
does not to provide stack function.
Stack mode: this mode opens the stack function, can make up a
stack system with other devices.
Priority
Each device in the system can be assigned a priority, devices with
higher-priority more likely to be elected as main device.
