Intellijel Tete, User Manual

Page: 98 / 173

Tête + Tetrapad Manual
MODE Select Menu
Long-press (>1 sec) the ​ SETUP ​ MODE ​ button to
display the MODE Select Menu:
Rotate the screen encoder to highlight the desired mode,
then press the encoder to select it. Mode options are:
● Combo ​ : In this mode, each of Tetrapad’s four
pads can be assigned a function independent of
the other three pads, such as: a fader; a bi-polar
fader; a crossfader; an LFO; a dual switch; or a
euclidean rhythm / finger drumming pad. The
chosen mode determines what type of signal
(CV, note, trigger, gate, etc.) is sent from each of
Tetrapad’s eight independent outputs, while its
multitude of multi-colored LEDs keep you
informed of exactly what’s happening within each
mode.
● Notes ​ : This mode divides Tetrapad’s four pads into 8, 12, or 16 zones. Each zone is like a key
on a keyboard, and can be user-configured (manually, by scale, or by chord) to output different
notes to four different outputs.
● Voltages ​ : This mode divides Tetrapad’s four pads into 8, 12, or 16 zones. Each zone is a
voltage storage bank, which sends 8 different memorized voltages to Tetrapad eight outputs.
Mode SETUP Menu
Once you’ve selected the desired Mode (as described
above), short-press (<1 sec) the
​
SETUP
​
MODE
​
button
to display its SETUP options.
Rotate the screen encoder to highlight the parameter you
wish to edit. The various SETUP menu options are
discussed on the following pages.
Page 97