Intellijel Tete, User Manual

Page: 75 / 173

Tête + Tetrapad Manual
Slew Between Notes
Tetrapad also gives you the ability to slew between notes. To do so, press the red SHIFT button
and continue holding it while turning Encoder 1.
Clockwise turns increase the time it takes to move from one note to another (up to approximately
a 4 second glide). Counterclockwise turns decrease the amount of time (down to “instantaneous”).
Slew times are indicated by a red Pad Status LED above each fader — with an LED glowing
increasingly brighter as the slew gets longer.
Slew time is a global setting within Keyboard Mode, meaning the rate of change affects all notes
equally.
NOTE: CV control over slew time is available in Tête’s
​
CV Setup Menu
​
. You can limit the extent to
which CV can control Slew by holding down the red SHIFT button while pressing & turning any of
the four Encoders. Counterclockwise turns set the lower CV-able Slew limit, while clockwise turns
set the upper CV-able Slew limit.
Page 74