Intellijel Tete, User Manual

Page: 152 / 173

Tête + Tetrapad Manual
Recording a Voltage Sequence
To record a voltage sequence:
1. Press Tête’s ​ RECORD ( ) ​ button.
2. Step-enter voltages by pressing the desired pad on your Tetrapad.
Each time you press a pad on Tetrapad, the top half of Tête’s screen shows a graphical
indication of all 8 voltages stored in that pad’s bank, plus the numerical value of the voltage
being sent to Out 1.
In addition, the pad is added to the scrolling voltage roll, and the display advances one step.
3. You can enter each pad press with or without gates. To enter a pad press with a gate event,
rotate the Encoder so that Tête’s Encoder Bar says “Record Gate.” To enter a pad press
without a gate event, rotate the Encoder so that Tête’s Encoder Bars say “Bypass Gate.”
4. These gate pattern choices have an audible effect only if you’ve assigned either ​ CV A ​ or ​ CV B
to output a ​ Touch ​ event in the CV Setup menu.
5. If you want multiple sequential steps to contain the same voltage bank, simply press the same
pad multiple times.
6. Continue entering voltage banks events, up to a maximum of 256 steps.
7. When you’re done recording, press the ​ RECORD ( ) ​ button again.
Page 151