Intellijel Tete, User Manual

Page: 150 / 173

Tête + Tetrapad Manual
Playing Back a Note Sequence
To play back a sequence:
1. Press Tête’s ​ PLAY ( ) ​ button.
The sequence plays back at the tempo defined in the
​
TEMPO Menu
​
(accessed by pressing
Tête’s ​ TEMPO ( ) ​ button). It will use either the internal clock or an external clock (if one is
patched into Tête’s ​ CLK ​ input and ​ External Clock ​ is enabled).
2. To speed up or slow down playback, set the ​ Seq Clock ​ parameter in the Mode SETUP Menu
(accessed by pressing Tête’s ​ SETUP ​ MODE ​ button).
You can divide the clock by ​ /2 ​ , ​ /3 ​ or ​ /4 ​ or multiply it by ​ x1 ​ , ​ x2 ​ , ​ x3 ​ , or ​ x4 ​ .
3. To play back with swing, set the ​ Seq Swing ​ parameter in the Mode SETUP Menu.
Options include ​ 50 ​ , ​ 54 ​ , ​ 58 ​ , ​ 62 ​ , ​ 66 ​ , ​ 70 ​ , and ​ 75% ​ swing.
4. As the sequence plays, take note of several features of Tête’s display, as shown below:
5. To pause a sequence, press the ​ PLAY ( ) ​ button again.
The
​
PLAY ( )
​
button will flash to indicate that a sequence is loaded, but
that it is not currently playing.
A paused sequence stops playing, but will restart from the stopped position
if the
​ PLAY ( ) ​ button is pressed again.
6. To stop a sequence, and return to its beginning, long-press the
​
PLAY ( )
​
button. A
subsequent press of the ​ PLAY ( ) ​ restarts the sequence from the beginning.
Page 149