Intellijel Tete, User Manual

Page: 143 / 173

Tête + Tetrapad Manual
Record & Play Unsynced
1. Press the ​ SETUP ​ MODE ​ button to display the Mode SETUP Menu.
2. Rotate Tête’s encoder to select the ​ Record Wait ​ option, and set it to ​ Off ​ (pressing the
encoder cycles between “Off” and “Touch”).
This tells Tête to begin immediately upon pressing the ​ RECORD ( ) ​ button.
3. Rotate Tête’s encoder to select the ​ Looper Sync ​ option and set it to ​ Off ​ , as well.
4. Press the ​ SETUP ​ MODE ​ button to exit the Mode SETUP Menu.
5. Rotate Tête’s encoder to select ​ Touch Pad ​ (or ​ Touch Bank/Gate ​ if in Voltages Mode).
If you select a “bypass” option (rather than a “touch” option), then touching a pad plays/records
a ‘rest’, as described further in
​ The Encoder Bar (In Looper) ​ .
6. Press the ​ RECORD ( ) ​ button.
The ​ RECORD ( ) ​ button will light solid red, and Tête will immediately
begin to record any gestures, with no regard to the beat or whether you’re
touching a pad.
7. Record your pad touches and gestures for as long as you like.
8. Press the ​ RECORD ( ) ​ button to stop recording.
The ​ RECORD ( ) ​ button turns off and the ​ PLAY ( ) ​ button flashes
green, indicating that there is now a recording in memory, but it will not start
to play back until you press the
​ PLAY ( ) ​ button.
9. Press the ​ PLAY ( ) ​ button to play back your recording.
It will light solid green (no flashing) to indicate that your recording is now
playing back.
10. To stop playback, press the ​ PLAY ( ) ​ button again. Playback will stop, and the ​ PLAY ( )
button will flash to indicate that a recording exists but is not currently playing.
Page 142