Intellijel Tete, User Manual

Page: 114 / 173

Tête + Tetrapad Manual
CV Setup: TRIG and RESET Inputs
Assign functions to Tête’s ​ TRIG ​ and ​ RESET ​ input jacks using the “Trig” and “Reset” settings in Tête’s
CV Settings Menu. The assignment options for both inputs are identical. The following assignment
descriptions apply to the TRIG input, but the same options are available for the RESET input:
● - (off) ​ : Any signal patched into the ​ TRIG ​ jack is ignored.
● Reset ​ : An input trigger patched into the ​ TRIG ​ jack causes the current loop/sequence to reset
to the beginning.
● Run ​ : A +5V gate is required in order for the current Sequence or Loop to play. Tête must be
in a play state (the ​ PLAY ( ) ​ button is solid green) in order for the Run feature to work. A
sequence/loop will run for as long as a +5V signal appears at the jack, and will pause when
the signal drops back to 0V.
● Mod Trig ​ : An input trigger patched into the ​ TRIG ​ jack is used by any X, Y, or Z CV input that’s
set to sample the incoming CV whenever a (Trig) input is received.
This is the ​ TRIG ​ jack’s default setting.
For example, if you assign ​ CV Z ​ to “ ​ Slew (Trig)” ​ in the Notes Mode CV Setup Menu, then the
CV changes at the ​ Z ​ input are sampled and held each time a rising edge signal appears at the
TRIG jack — but only if the TRIG Input is assigned to “ ​ Mod Trig ​ ”.
● Looper ​ : With this assignment, Tête’s Looper uses the ​ TRIG ​ input to define a loop’s start time
and length (rather than using the internal or external clock). In addition, this assignment
redefines
​ Loop Length ​ (as set in the Mode Setup menu) as the “number of pulses on the
TRIG inputs,” rather than the “number of clocks pulses.”
In general, this lets you trigger Loop recordings that conform to “bars,” rather than “beats.”
● Tggl Loopy ​ : An input trigger patched into the ​ TRIG ​ jack toggles ​ Loopy ​ on/off.
● Gate Loopy ​ : An input gate patched into the ​ TRIG ​ jack turns ​ Loopy ​ on/off. When the gate is
high, Loopy is on. When the gate is off, Loopy is off.
Page 113