Intellijel Steppy 3U Manual Download Page 6

/

  
 

 

Steppy   3U   Manual 

 

 
 

 

Overview  

Steppy   is   a   4-track   programmable   gate   sequencer   with   eight   internal   memory   slots,   external  
clocking,   various   playback   options,   and   a   performance-first   design   aesthetic.  

Each   track   features   numerous   parameters   that   govern   its   playback   independently   of   the   other  
tracks.   Specifically:  

● Each   track   has   its   own   length,   which   can   range   from   1-step   to   64-steps,   allowing   for  

polyrhythms,   fills,   or   constantly   evolving   gate   interactions   between   tracks.  

● Each   track   has   its   own   gate   length,   which   ranges   from   very   short   to   very   long,   with   tied  

gates   possible   at   the   extreme   setting.  

● Each   track   has   its   own   clock   divider,   allowing   patterns   to   play   out   over   completely  

different   periods   of   time.  

● Each   track   has   its   own   swing   setting,   which   offsets   the   timing   of   every   other   step.  

● Each   track   has   its   own   delay   setting,   which   offsets   the   timing   of   every   step.  

● Each   track   has   its   own   probability   control,   which   sets   the   likelihood   that   each  

programmed   gate   will   fire   when   called   upon   by   the   pattern.  

● Each   track   can   be   shifted   (or   ‘rotated’)   forward   or   backward   by   a   number   of   steps.   So   if  

you’ve   created   a   pattern   that   ‘feels’   like   it   has   its   downbeat   on   step   3,   you   can   shift   that  
pattern   two   steps   backward,   so   that   the   downbeat   sits   on   step   1.  

Tracks   can   be   selected   and   modified   in   real   time   as   the   sequence   plays.   A   black   SELECT  
button   allows   you   to   access   each   track   (and   each   page   of   16   steps   within   that   track)   directly  
through   Steppy’s   intuitive   multifunction   buttons   array.  

Tracks   can   be   individually   muted   and   unmuted,   and   a   special   performance   mode   (called  
“Loopy”)   enables   you   to   touch   any   two   gate   steps   and   instantly   create   a   performance   that   loops  
between   those   steps.  

In   addition,   each   step   within   a   track   can   be   assigned   a   different   number   of   ratchets   (repeats),  
and   a   special   Tap   Record   mode   lets   you   record   patterns   in   real-time,   rather   than   via   a  
step-recording   grid.  

Track   patterns   can   be   cleared   without   clearing   their   playback   parameters,   and   all   track   patterns  
(along   with   their   individual   playback   and   performance   parameters)   can   be   saved   as   a   preset   to  
one   of   eight   internal   memory   slots.  

 

 

Page   5  

Summary of Contents for Steppy 3U






































Reviews: