Connecting a CVx to a MIDI 1U
If you use the optional
CVx
expander module, you will need to connect it to both power and to the
MIDI 1U
module.
1.
Turn off power to your case.
2.
Connect the supplied 10-pin-to-16-pin power cable between the
CVx
and one of your case’
16-pin power connectors (using the same technique discussed earlier in
3.
Connect one end of the supplied 6-pin to 6-pin ribbon cable to the 6-pin I2C connector on the
MIDI 1U
module. The connector is keyed, and will fit in only one direction.
4.
Connect the other end of the supplied 6-pin-to-6-pin ribbon cable to either one of the 6-pin I2C
connectors on the
CVx
. The connector is keyed, and will fit in only one direction.
5.
Set both DIP switches on the back of the CVx to the down position.
In the following example, we’ve set both DIP switches to their down positions, which identifies
the CVx as “Expander 1” (important if you chain together multiple CVx modules, as
).
6.
Power on your case.
MIDI 1U System Manual
10
