ORDER
This button opens the ORDER screen, which controls the order that stages
play back in the currently selected track.
There are two main parameters accessible by the button:
●
PLAY ORDER
: The upper parameter defines the order in which any enabled stages will play
back. Metropolix features many order choices, as discussed in
, later.
Turn the encoder to select a different playback order.
●
DIRECTION
: The lower parameter sets whether the chosen
PLAY ORDER
occurs in a
forward
or
reverse
direction (toggled by
pressing the encoder
). Specifically:
Forward : When the
DIRECTION
parameter is set to ‘Forward,’ the sequencer advances
through stages in the chosen order.
Reverse : When the
DIRECTION
parameter is set to ‘Reverse,’ the sequencer advances
through stages in the opposite order.
Patterns repeat and the sequencer resets when the sequence reaches the length defined by the
. Specifically:
● If the
LEN
screen’s
PULSES
value is set to ‘Auto’, then the pattern repeats after playing through
the chosen number of
STAGES
.
● If the
LEN
screen’s
PULSES
value is set to a number, then the pattern repeats after playing the
chosen number of
PULSES
.
Metropolix Manual
54
