Loopy Latching
You can latch the Loopy cycle, so it continues to play when you lift your finger(s) off the Stage
buttons. Even when you navigate to another screen, a latched Loopy cycle will continue to play.
To latch Loopy playback:
1.
Play a Loopy cycle using either the 1-finger or 2-finger technique (described above).
2.
While the loopy cycle is playing (and the LOOPY screen is visible), perform either of the
following actions to latch Loopy playback:
● Press the
LOOPY
button again, or
● Navigate to a different screen while continuing to hold the Stage button(s) down.
When Loopy is latched, a lock icon appears in the Action Display at the bottom of the screen.
3.
To unlatch Loopy, navigate back to the LOOPY screen (if you’re not already on it), then press
either the LOOPY button or the encoder.
Metropolix Manual
38
