TRANSPORT BUTTONS
(SECTION 5)
RUN
This button toggles between starting and stopping the sequencer. If the sequencer is not playing,
press the
RUN
button to start it playing in sync with the next pulse (or immediately if the pulse
happens at the same time). If a sequencer is playing, press the
RUN
button to stop it immediately.
When the sequencer is stopped, the gate outputs return to 0V.
The
RUN
button (and the corresponding
RESET
jack, if configured as a
RUN
jack in the
) will simultaneously start/stop playback of all three Metropolix tracks (
TRK 1
,
TRK 2
and
MOD
). You can, however, mute and unmute individual tracks (and even individual MOD Lanes),
by holding the
LOOPY
button while pressing the TRACK button or MOD Lane button that you want
muted. For more information, see
.
NOTE 1: In order to run, Metropolix needs a clock, either internally generated or externally supplied.
See the
section, later in this manual, to learn about the different ways to clock Metropolix.
RESET
This button manually resets the sequencer. The reset is synchronized to the first clock pulse after
you press the
RESET
button. When the sequencer is reset, the stage position returns to its original
counters are reset.
The
RESET
button (and the corresponding
RESET
jack, if configured as a
RESET
jack in the
) simultaneously resets all Metropolix tracks and MOD Lanes.
NOTE: To reset only a single Track (or all MOD Lanes), hold-down the desired button ( TRK 1 ,
TRK 2 or MOD ) while pressing the RESET button.
Metropolix Manual
31
