AUX INPUT SETTINGS
SECTION 11
X, Y and Z are three user-configurable control voltage inputs
for Metropolix — each with an associated attenuverter —
which allows you to externally control and modulate an
extensive number of sequence parameters, per-track. An
input voltage of ±5V is required to span the full range of an
assigned destination.
Each input has its own setup menu (accessed by pushing its
corresponding AUX Settings button), from which you can
select the track(s) and the parameter you wish to control.
Attenuverters scale and/or invert any incoming control
voltages. In the case of gate inputs, turning the inverter
counterclockwise from noon inverts the function of the gate.
There are two main parameters on each of the AUX Settings screen:
AUX <n> PARAM
: Selects the parameter you wish to control with the corresponding input (
X
,
Y
,
or
Z
). Choices are:
None
Mute
(
⎍
)
Reset
(
⎍
)
Accum
(
⎍
)
Octave
Root
Accum Invert
(
⎍
)
Pitch Offset
Skip Invert
(
⎍
)
Accum Reset
(
⎍
)
Pitch Post
Slide
(
⎍
)
Clock In Div
Pitch Pre
Slide Amount
Direction
(
⎍
)
Play Order
Slider Invert
(
⎍
)
Gate Length
Probability
Slider Range
Gate Scale
Pulse Count
Stages Len
Loopy
(
⎍
)
Pulse Div
Stage Offset
Loopy Pulses
Pulses Len
Swing
Loopy Offset
Ratchet
Trk Out Swap
(
⎍
)
The list above indicates Gate and Trigger signals with a gate symbol (
⎍
),
meaning the indicated function will occur when the gate is high (or the leading
Metropolix Manual
121
