15
Press both transmitter corners until it clicks into the holder, you will hear 2-clicks
sound.
If the transmitter isn’t embedded properly
，
it may cause the transmitter to break
away.
Warning
The sensors
（
Model No. IG2-SR-1P
）
and transmitters
（
Model No. IG2-TR-
1P
）
of the Continuous Glucose Monitoring Systems should be suitable for
each other. The products of different generations cannot be connected to each
other and thus cannot work. Make sure that the system uses the correct
Intelligo Free software version.
4.2 Use
4.2.1 Pairing Transmitter
Enter Transmitter SN and PIN Code to start pairing.
Note:
For problems in pairing, check
<Troubleshooting>.
