6
Prior to operation the cylinder will need to be purged to remove
air impurities.
3
4
5
Once the regulator is flush, apply a maximum torque of 58Nm (42.8ft.lb).
Always conduct a leak check on the completed assembly.
Assembly and connection
3
Assembly of regulator to cylinder
3.1
1
2
By hand, carefully thread the
regulator assembly into the cylinder.
Tighten the regulator until it is mated
flush to the neck of the cylinder.
· Take the cylinder and regulator and inspect for physical damage or debris,
reject if visible to the eye.
· Inspect the mating threads for damage or debris, reject if visible to the eye.
