IA-3178-U2i
39
www.intelligent-appliance.com
Specifications are subject to change without notice
32-ch Relay
USB or RS-232 Controlled
^^M – Activate Relays per Predefined Memory State
Description
This command forces the predefine Memory State on all relays.
This command may be used in “Normal” mode only.
Syntax
^^M<CR>
^^
Delimiter character
M
Activate Relays per Memory Status
<CR> Carriage Return - End of command
Response
Relay state is set to predefine memory state, no feedback message is
returned.
Example
Response: |M 80000000
Command: ^^M <CR>
Response: Relay #32 is activated (no feedback message)
This command may be used in “Normal” mode only.
See
for more information about Single/Pair operation.
In Order to use this command, user must define
“Set Temporary Memory State” (Command
) first
Note
!
