IA-3178-U2i
34
www.intelligent-appliance.com
Specifications are subject to change without notice
32-ch Relay
USB or RS-232 Controlled
!aaEdddddddd – Set initial state
Description
This command defines the relays state at POWER-UP.
Syntax
!aaEdddddddd <CR>
!
Delimiter character
aa
Hexadecimal address of the device
E
System control command
d
Relay output activation command data for each nibble in hex format
<CR> Carriage Return - End of command
Response
|Edddddddd<CR> if the command was valid
Example
Command: !
00E10001000
<CR>
Response: |E 00100010<CR>
This command will define the initiate state of relays #13 and #29 as
“Activated”.
Default state is !00E00000000 (All relays are OFF at power up)
Note
!
