IA-3178-U2i
19
www.intelligent-appliance.com
Specifications are subject to change without notice
32-ch Relay
USB or RS-232 Controlled
?aa50 – Get Device mode (Register #50)
Description
This command reads the module operation mode
Syntax
?aa50<CR>
?
Delimiter character
aa
Hexadecimal address of the device
50
System Mode command
<CR> Carriage Return - End of command
Response
_dd<CR> if the command was valid
dd
Mode (00-FF)
82
Enable BR change
02
Report on command errors
00
Normal
<CR> Carriage Return - End of command
Example
Command: ?0050<CR>
Response: _82<CR>
In this example the module operation mode enables baud rate change.
It will also send error messages for invalid commands.
