INTELLICYT iQue SCREENER Hardware Manual Download Page 95

Page: 95 / 110

iQue

Hardware Manual: Part Number 10554 Rev C., Special Topics: Connecting iQue Power and Data Cables

Connecting iQue Power

and Data Cables

Overview

This procedure shows the proper way to connect the iQue power and data cables. It is used as part of first time

startup and also any time that the instrument needs to be physically moved to a new location.

The iQue Uninterruptible Power Supply

Each iQue comes with an Uninterruptible Power Supply (UPS). This UPS is required equipment and the instrument’s

CE Mark is invalid unless the iQue Screener power connection is connected to the UPS.
The iQue comes with one of two UPS units depending on the power system of the target locale.

110V Locales

APC BR1500G UPS

220V Locales

APC BR900GI

Summary of Contents for iQue SCREENER















































































































Search results

Summary of Contents for iQue SCREENER

Reviews:

Brands by name

Popular brands

INTELLICYT iQue SCREENER, Hardware Manual

Search results

Summary of Contents for iQue SCREENER

Reviews:

Brands by name

Popular brands