INTELLICYT iQue SCREENER Hardware Manual Download Page 15

Page: 15 / 110

iQue

Hardware Manual: Part Number 10554 Rev C., Using This Manual

Accessing Tech Support

For help with a technical question that is not addressed within the documentation, please contact

support@intellicyt com

or IntelliCyt Customer Service at (505) 345-9075 Opt 2.

Before contacting us, please be prepared to answer the following questions:

•

What were you doing when the problem occurred?

•

Did you try to follow the steps in this guide, but they didn’t work? If so, what pages?

•

Can you reproduce the problem?

•

Did you try to solve the problem? If so, what steps did you take and what did you observe?

•

Which error messages, if any, appeared?

Your answers to these questions help us provide you with a solution as quickly as possible.

Summary of Contents for iQue SCREENER















































































































Search results

Summary of Contents for iQue SCREENER

Reviews:

Brands by name

Popular brands

INTELLICYT iQue SCREENER, Hardware Manual

Search results

Summary of Contents for iQue SCREENER

Reviews:

Brands by name

Popular brands