Intelix V1A2 Installation Manual Download Page 1

Specifications 

 

Environment 

Composite video and unbalanced audio for the consumer and 
commercial market 

Devices 

DVD, VCR, camcorders, audio receivers, audio amplifiers, splitters, 
AV switchers, AV mixers, and other analog audio/video equipment 
featuring coaxial input or output with BNC or RCA connectors 

Bandwidth 

Video: 

DC to 8 MHz 

 

Audio: 

105 Hz to 28 kHz 

Maximum 
Video Input 

1.1 Vp-p 

Insertion Loss 

Less than 2 dB per pair over the frequency range from DC to 8 MHz 

Return Loss 

Greater than 15 dB over the frequency range from DC to 8 MHz 

Com. Mode 
Rejection 

Greater than 40 dB @ 8 MHz 

Impedance 

RCA side (Video): 

75 ohms 

 

RCA Side (Audio):  

600 ohms 

 

RJ45 side: 

100 ohms 

Cable 

UTP: 

24 gauge or lower solid copper 
twisted pair wire 

 

Impedance: 

100 ohms at 1MHz 

 

Maximum capacitance: 

20 pf/foot 

 

Attenuation: 

6.6 dB/1000 ft at 1 MHz 

 

RCA: 

Standard RCA phono cable 

Distance 

Color: 

1500 feet (Cat 3 UTP) 

 

 

2200 feet (Cat 5 UTP) 

 

B&W: 

2000 feet (Cat 3 UTP) 

 

 

2500 feet (Cat 5 UTP) 

Connectors 
 

One (1) BNC connector 
Two (2) RCA connectors 
One (1) RJ45 jack 

Pin config. 

Signal 

RJ45 Active Pins 

 

Video: 

7 & 8 

 

Audio 1: 

1 & 2 

 

Audio 2: 

3 & 6 

Dimensions 

2.4” x 2.4” x 1.0” 

Warranty 

2 Years 

 

*Specifications subject to change without notice 

 

 

2222 Pleasant View Road, Suite #1

Middleton, WI.   53562 

608-831-0880 

FAX 608-831-1833 

[email protected] 

www.intelix.com 

V1A2 Video Stereo Audio Balun 

Installation Guide 

 

 

 

Overview

 

The V1A2 Video Stereo Audio Balun transmits composite baseband video and 
audio signals via unshielded twisted pair (UTP) cable in a Structured Cabling 
System. The V1A2 is used in pairs to transmit standard NTSC, SECAM, and PAL 
composite video. It converts a composite baseband video signal from 75 ohms coax 
to 100 ohms for UTP transmission, as well as 1000 ohm stereo audio to 100 ohms.  

The V1A2 is connected to the structured cabling via a modular wall jack in the work 
area. It is equipped with a BNC 75 ohm connector and two standard RCA phono 
jacks at one end, as well as an RJ45 jack at the other end. 

 
Applications 

The V1A2 is designed for use with CCTV cameras and monitors, videocassette 
recorders (NTSC, PAL, or SECAM), video-conferencing, and other audio/video 
equipment.  Applications include: security/surveillance monitoring, video bulletin 
boards, financial information services, news services, education, video training, 
airport displays, video capture, stock exchange, hotels, and convention centers. 
 
 
 
 
 
 

Reviews: