Intelix LLC
Specifications
Environment
Component (YPbPr) video. Composite video.
Devices
DVD, VCR, TV, satellite receivers, monitors,
switchers, home theatre and other equipment
supporting component video.
Transmission
Transparent to the user.
Bandwidth
Video: DC to 8 MHz.
Maximum Input
1.1Vp-p
Insertion Loss
Less than 2 dB per pair over the frequency range
from DC to 8 MHz
Return Loss
Greater than 15 dB over the frequency range from
DC to 8 MHz
Common Mode
Rejection
Greater than 40 dB @ 8 MHz
Max. Distance Color –
Cat 5 UTP
Component (YPbPr): 1,000 ft (305m).
Composite: 2200 ft (670m)
Cable – UTP
24 gauge or lower solid copper twisted pair wire
impedance: 100 ohms at 1 MHz
Maximum capacitance: 20 pf/foot.
Attenuation: 6.6 dB/1000 ft at 1 MHz
Cable – BNC
Impedance: 75 ohms at 1 MHz
Connectors
Reverse polarity sensitive
One (1) gold-plated RCA connector
Two (2) screw terminals for twisted pair
Impedance
Input: 75 ohms unbalanced (RCA connector)
Output: 100 ohms balanced UTP (screw terminals)
Temperature
Operating: 0° to 55°C. Storage:-20° to 85°C.
Humidity: up to 95%
Enclosure
ABS fire retardant plastic
Dimensions
1.25” x 0.5” x 0.5” (3.2 x 1.3 x 1.3 cm)
Weight
1.5 oz (42.5gm)
*
Specifications subject to change without notice.
2222 Pleasant View Road, Suite #1
Middleton, WI 53562
Tel.: (608) 831-0880
Fax: (608) 831-1833
Toll Free (N.Am): 866-4-MATMIX
E-mail: [email protected]
URL: www.intelix.com
V1-CV Component Video Balun
Installation Guide
Introduction
The Intelix V1-CV Component Video Balun allows a single component video signal
(Y, Pb, or Pr) to be transmitted via cost-effective unshielded twisted pair (UTP)
cable. Three (3) balun pairs are required for one point-to-point component (YPbPr)
video connection. The product allows three coaxial cables to be replaced by one
Category 5 twisted pair cable allowing standard structured cabling techniques to be
used for neater and more streamlined cabling. The V1-CV is compact enough to
allow three (3) units to be connected side by side on the back of the component
video equipment.
Installation
Component Video (YPbPr) Connection:
Three (3) pairs of Component Video Baluns (six baluns) are needed to complete one
component (YPbPr) connection via Cat5 twisted pair. To install V1-CV baluns, perform
the following steps:
1.
Identify the pin configuration of the baluns. One twisted pair is required. The
V1-CV is reverse polarity sensitive. Please ensure that wiring is straight-
through (Ring to Ring, Tip to Tip)
