AS-1H1DP-WP Installation Guide
17
RS232 Control
Switching Commands
Default RS232 Settings: 9600 baud, 8 Data bits, 1 Stop bit, Parity = None
<CR>
= Carriage return (Hex 0D)
<LF>
= Line Feed (Hex 0A)
Power Management
In addition to going to a low-power mode when using the Display Control functions, the AS-1H1DP-WP can also be
set to this mode via RS232.
Description
Command
Response
Enter low-power mode
STANDBY<CR><LF>
STANDBY!<CR><LF>
Exit low-power mode
WAKE<CR><LF>
WAKE!<CR><LF>
Description
Command
Response
Select HDMI input
SET HDMI<CR><LF>
SET HDMI!<CR><LF>
Select DisplayPort input
SET DP<CR><LF>
SET DP!<CR><LF>
Get selected input
GET IN<CR><LF>
GET IN!<CR><LF>
AND
HDMI 1!<CR><LF>
OR
This response indicates HDMI input is
selected
DP 1!<CR><LF>
This response indicates DisplayPort input is
selected
Get HDMI video status
GET HDMI<CR><LF>
HDMI 1!<CR><LF>
OR
This response indicates video present on
HDMI input
HDMI 0!<CR><LF>
This response indicates no video present
on HDMI input
Get DisplayPort video status
GET DP<CR><LF>
DP 1!<CR><LF>
OR
This response indicates video present on
DisplayPort input
DP 0!<CR><LF>
This response indicates no video present
on DisplayPort input
Get Auto-switching state
GET AUTO<CR><LF>
AUTO ON!<CR><LF>
OR
AUTO OFF!<CR><LF>
Summary of Contents for AS-1H1DP-WP
Page 2: ......
