7 Tutorial: Milling a Sample Part
7.7 Verifying the Program
86
7.
Click
Select Tool
.
8.
Tool 01 is now selected.
7.7.
VERIFYING THE PROGRAM
Tool path verification allows you to check for programming errors before actually running the part
program on the Milling Center.
Follow this procedure to verify the program.
Procedure: Verifying the Program
1.
Click
Program
|
Verify
in the Main Menu or click the Verify icon
in the Standard Toolbar.
2.
Ensure that Start at Line is set to
1
. This specifies that the program should be run from the first line
onward.
3.
Click
Verify Program
.
In the Verify window, the cutting tool you specified earlier is now displayed at the initial position you
specified.
