2 Introducing the ProMill 8000
2.2 ProMill 8000 Components
9
2.2.1.
External View
The external view is shown below.
1.
Safety shield (door)
2.
Jog pendant (optional)
3.
Emergency stop switch
Notes:
The Safety door encloses the milling area to help protect the operator from flying chips. A
magnetic shield interlock switch prevents the machine from operating with the shield open.
The Emergency Stop button is used to halt machine operation. When pushed, machine
operation stops immediately. To resume operation, the button must be rotated clockwise and
will then pop out on its own. It is important that this button be pushed in (i.e. engaged) before
performing any manual operation, such as changing the stock or tooling.