Intelicis Cedar 880AG, User Manual, Page: 71 / 105

Cedar 880AG Enterprise Dual-Radio AP/Bridge
11 Command Line Interface
The Command Line Interface is available through a serial console port, telnet or SSH. To
establish a telnet or SSH connection, enter one of the following commands.
telnet 192.168.1.188
ssh 192.168.1.188
11.1 Base Commands
11.1.1 enable
Syntax:
enable
Description
This command allows the user to enter the privileged mode to do advanced
configuration.
Example:
Cedar# enable
11.1.2 disable
Syntax:
disable
Description:
This command allows the user to leave the privileged mode and return back to basic
mode.
Example:
Cedar# disable
11.1.3 config save
Syntax:
config save
71