Intelicis Cedar 880AG, User Manual, Page: 60 / 105

Cedar 880AG Enterprise Dual-Radio AP/Bridge
4 Click Static WEP Key, and enter a 5-, 13- or 16-character WEP key in the WEP Key
0 field. Make sure to use the same WEP key when configuring the wireless client
software.
5
Turn MAC authentication on and select an MAC Auth Profile from the list box.
6
Select a RADIUS Profile from the list box.
7
Click Apply .
8
Click Wireless->Radio 2 from the Cedar web interface to display radio 2 parameters.
9
Click myWLAN from the available WLAN list box and add it to the selected WLAN
list box.
10
Click Apply .
11
Save the configuration.
7.3.3 Bridge Link
1
Click Wireless->Bridge Link from the Cedar web interface to display all the Bridge
Links.
2
Click Add to add a new Bridge Link. Enter the following sample data and use default
for the remainder of the parameters.
Name: myLink
3
Enter Link SSID (the remote Bridge should use the same SSID).
4
Enter a security key which is 8 to 63 characters long (the remote Bridge should
configure with the same security key).
5
Click Apply .
6
Click Wireless->Radio 1 from the Cedar web interface to display radio 1 parameters.
7
Change channel to a fixed channel (the remote Bridge should use the same channel).
8
Make sure the first WLAN on radio 1 uses WPA2/AES for security.
9
Select brglnk or ap,brglnk for mode.
60