manualshive.com logo in svg

Intelicis Cedar 880AG, User Manual, Page: 12 / 105

Share
Download
Intelicis Cedar 880AG User Manual Download Page 12

 

                                                                                 

                                                                                

Cedar 880AG Enterprise Dual-Radio AP/Bridge

 

2 Installation 

This chapter provides instructions on how to install Cedar 880AG. 
 

2.1 Package 

Contents 

Before installation, please inspect the package contents first and report any missing or 
damaged items to your sales representative. This package should contain the following: 
 

•

 

Cedar 880AG Dual-Radio Access Point 

•

 

 

•

 

Mounting rubber foot (for desktop installation) (4) 

•

 

Power Adaptor 

•

 

CAT5 Ethernet cable (RJ45 to RJ45) 

•

 

Cedar 880AG Product Resource CD 

 

2.2 Physical 

Description 

2.2.1  Top Panel  

 

 

Figure 2.1 Cedar 880AG Top Panel 

 

•

 

 Power LED

 

This Power LED is constantly ON when power is applied. 
 

•

 

 Ethernet Link/Activity LED

 

This LED is ON when Ethernet establishes link; flashing when there is Ethernet 
activity. 
 

•

 

 802.11a Wireless LED

 

This LED is slow flashing when 802.11a wireless is ready for client to associate; fast 
flashing when there is traffic on 802.11a wireless. 

                                                                       

 

 

 

 12  

Summary of Contents for Cedar 880AG










































































































Reviews:

No comments