48
6. Configure Event
6.1. Motion Detection
In the Motion screen you can configure the motion detection parameters, such as region and sensitivity, as well as the
actions the camera will take when it detects motion.
Motion Detection
»
Enable:
if checked, the camera will perform motion detection.
»
Period:
field to define when detection is active.
By clicking on the
Settings button, a screen will appear as shown in the following image:
Period of operation
The operation period is divided into weekdays, and for each day up to six periods with different time ranges can be created.
Click on the
Configure button for the respective day of the week and check that it will be highlighted, as shown in the
image
Period of operation.
By default, all days are already configured to perform the movement detection in the full period: 00h to 24h. To edit this
setting, enter the range(s) of the start and end times and, to validate the period setting, enable the corresponding check-
box, otherwise it will not be analyzed and movement detection will not be made in that time range.
If the period schedule is the same for other days of the week, you can replicate it by clicking on the check-box for the
corresponding day. If it is the same for every day, just click on the check-box of the
All field.
After finishing the settings, click on the
Save button. You can view the schedules through the colored bars, as highlighted
in the image
Period of operation.
