32
RTMP
This service provides the user with the possibility to share the video stream through a third party software or platform.
Cameras with no audio input or built-in microphone may be incompatible with some streaming platforms. To avoid
incompatibility please refer to the regulations provided by the software or platform developer.
RTMP Service
»
Enable:
enables or disables the RTMP service.
»
Stream Type:
selects the type of stream that will be transmitted. Remember that the better the quality of the stream,
the more bandwidth will be required.
»
Type of address:
the user can select whether the address will be given by an IP address or by an internet link. The IP
address is given as non-custom and the internet link as custom.
»
IP address:
in this field the user informs the IP address of the RTMP server.
»
Port:
in this field the user informs which port is enabled to receive the service.
»
Custom address:
in this field the user informs which internet link will receive the service. The link must be placed in the
following format Transmissi / +Stream_key. The link must not contain special characters.
4.6. Interface
This is where video overlay options are configured.
»
Mask Area:
adds a mask over the desired part of the image, which prevents the image at that location from being seen.
You can set up to four masking areas, as shown below.
Mask area
»
Channel Title:
used to visually identify which camera is showing the video in question. You can configure the title and
the position it is in. Maximum length 63 characters.
