Intel Xeon Phi Processor x200 Thermal/Mechanical Specification And Design Manual Download Page 89

Page: 89 / 114

Figure E-17. Bolster Plate, Small Guide Post

2200 MISSION COLLEGE BLVD.

P.O. BOX 58119

SANTA CLARA, CA 95052-8119

.05

3.5

0.1

3.0 MAX 7

20±0.25

G93935

DWG. NO

SHT.

REV

SHEET 1 OF 1

DO NOT SCALE DRAWING

SCALE: 9:1

G93935

REV

DRAWING NUMBER

SIZE

KNL BOLSTER SMALL GUIDE POST

TITLE

DEPARTMENT

SEE NOTES

FINISH

MATERIAL

DATE

APPROVED BY

9/11/15

DATE

CHECKED BY

8/16/13

DATE

DRAWN BY

8/16/13

DATE

DIMENSIONS ARE IN MILLIMETERS

THIRD ANGLE PROJECTION

REVISION HISTORY

ZONE

REV

DESCRIPTION

DATE

APPR

TOOLING RELEASE

9/5/14

1. ADDED TAPER TO POST. ROLLED PART NUMBER TO -002.

2. CHANGED POST DIAMETER FROM 4.5MM TO 3.5MM.

3. CHANGED POST BOTTOM INTERFACE DIAMETER FROM 3MM TO 2.5MM

4. UPDATED NOTE 2 AND ADDED NOTE 7.

12/10/14

ALL

1. REVISED PART NUMBER TO -003.

2. REMOVED BASE TAPER.

3. REMOVED NOTE 4 AND 6.

03/25/15

1. REMOVED 8MM AND 2.17MM DIMENSIONS.

2. INCREASED TOLERANCE FROM .1 TO .25MM ON 20MM DIMENSION

04/15/15

3-B

1. ADD NOTE 6 TO CALL OUT CRITICAL TO DIMENSIONS.

4/23/15

6-A

2-B

1. CHANGED DIMENSION TO STATE MAX 3.0 AND CALLOUT #7 SYMBOL

2. ADDED NOTE 7 TO CALLOUT REQUIRED PUSH OUT FORCE.

3. ADDED GD & T FEATURE CONTROL FRAMES

8/28/15

B-6

1. ADDED OPTIONAL CHAMFER/RADIUS TO AID IN ASSEMBLY OF PART.

10/01/15

C-7

1. CHANGED FEATURE CONTROL FRAME DIMENSION FROM 0 TO 0.1.

2. CHANGED FEATURE CONTROL FRAME SYMBOL FROM TRUE POSTION TO

PERPENDICULARITY

10/15/15

NOTES: UNLESS OTHERWISE SPECIFIED:

1. REFERENCE DOCUMENTS

ASME Y14.5M-2009 - STANDARD DIMENSION AND TOLERANCES

2. FEATURES NOT SPECIFIED ON DRAWING AND FEATURES WITHOUT SPECIFIED TOLERANCE

SHALL BE CONTROLLED BY 3D CAD DATABASE. FOR FEATURES NOT EXPLICITLY TOLERANCED:

(BASIC DIMENSIONS FROM THE 3D CAD MODEL).

3. DIMENSIONS ARE IN MILLIMETERS

4. MATERIAL: 18-8 STAINLESS STEEL; AISI 303, 304, 305; JIS SUS304; OR EQUIVALENT

5. PROCESS TEST: 168 HRS 85

C / 85% HUMIDITY WITH NO VISIBLE CORROSION.

6. DIMENSIONS MARKED ARE CRITICAL TO FUNCTION DIMENSIONS (CTF).

7 SUPPLIER DEFINED DIAMETER TO MEET PRESS FIT SEPARATION FORCE REQUIREMENT.

SEE APPLICABLE BOLSTER PLATE ASSEMBLY DRAWING.

- PUSHOUT FORCE > 89N (20LBF)

CHAMFER TO CORNER (MAX 1.0 HEIGHT) OR 1.0MM

RADIUS MAX CAN BE ADDED AS AND OPTION

FOR STRUCTURAL INTEGRITY DURING ASSEMBLY

PARTS LIST

DESCRIPTION

PART NUMBER

ITEM NO

QTY

KNL BOLSTER SMALL GUIDE POST

G93935-003

TOP

Order Number: 334785-002

Intel

Xeon

Phi™ Processor x200 Product Family TMSDG



Retention Assembly Mechanical Drawings

Summary of Contents for Xeon Phi Processor x200



















































































































Search results

Summary of Contents for Xeon Phi Processor x200

Reviews:

Brands by name

Popular brands

Intel Xeon Phi Processor x200, Thermal/Mechanical Specification And Design Manual

Search results

Summary of Contents for Xeon Phi Processor x200

Reviews:

Brands by name

Popular brands