Peripheral Drive Support
Intel®
Server System SR1625UR TPS
44
Revision 1.5
Intel order number E47487-007
6.
Peripheral Drive Support
The system provides a slimline drive bay that can be populated with an SATA optical drive (CD-
ROM, DVD, DVD/CDR). Drives are mounted on a tool-less tray which allows for easy installation
into and removal from the system. The slim-line devices are not hot- swappable.
6.1
Optical Drive Support
The system provides a slimline drive bay that is designed to support a single slimline SATA
optical drive. For a list of supported drives, use the Server Configurator Tool available at
The optical drive type is mounted to a tool-less assembly latch that allows for easy installation
and fixation in the system. Once it is inserted into the system, the assembly locks into place. It
is not hot-swappable. For removal, the system must be powered down, the chassis top cover
removed and the locking latch disengaged. For additional details, see the
Intel
®
Server System
SR1625UR Service Guide
.
Figure 27. Slimline Optical Drive Assembly
The SATA Optical drive plugs directly into the backplane, using industry standard 13-pin SATA
connector. This SATA channel is routed from USB to SATA converter, located on the
backplane. The optical drive is seen as a USB device in the system.
Table 39. Slimline Optical Drive Slot Connector (J6C1)
Pin #
Signal Name
S1
GND
S2
SATA_TXP
S3
SATA_TXN
S4
GND
S5
SATA_RXN
S6
SATA_RXP
S7
GND
