Intel® Server System S9200WK Product Family Setup and Service Guide
46
4.8
Air Duct Replacement (Air Cooled Compute Modules Only)
4.8.1
Air Duct Removal
Figure 46. Removing the air duct
1.
Remove the compute module to be serviced from the server chassis (see Section 4.2.1).
2.
Press the latches located on both sides of the compute module inwards (see Letter A).
3.
Carefully lift the front edge of the air duct away from the compute module (see Letter B).
4.
Pull the air duct away from the compute module (see Letter C).
4.8.2
Air Duct Installation
Figure 47. Installing the air duct
1.
Align and attach the hinge slots located on the back end of the air duct with the hinge posts located
on both sides of the compute module (see Letter A).
2.
Lower the air duct down until both the left and right side latches snap into place (see Letter B).
