Intel® Server System S9200WK Product Family Setup and Service Guide
34
2.
Press the green latch inward (see Letter A) and lower the lever in front of the compute module (see
Letter B).
3.
Grasp the lever and pull out the compute module from the chassis (see Letter C).
Note
: To keep the system operating within its thermal limits, compute module bays must be populated
with either a compute module or blank when any of the installed compute modules are operational.
4.2.2
Compute Module Installation
Replacement compute modules can be re-installed into a server chassis without impacting the operation or
functionality of other operational compute modules.
•
Figure 27. Installing a compute module
1.
Ensure the lever in front of the compute module is lowered. If not, press the green latch inward and
lower the lever.
2.
Align the compute module to its corresponding bay and push it into the chassis until the key pins in
the lever are inside the chassis inner wall key hole.
3.
Raise the lever to secure the compute module. (see Letter B)
2U Compute Module shown **
