Intel® Remote Management Module 3 User Guide
SMASH
–
Lite* Interface
(System Management Architecture for Server Hardware* by AMI*)
Revision 1.3
75
Table 29: Remotesap1 - Supported Verbs
Verb
Is used to
cd
change from one valid target path to any other valid target path.
exit
exit from the current SMASH* session.
help
provide information on using SMASH*.
set
set the r/w supported properties
show
show all the targets, properties, and verbs supported by this target.
version
show the current version of SMASH*.
Figure 63: REMOTESAP1 Target
8.11
Dnsendpt1
The
dnsendpt
target has the configurable parameters for Domain Name System (DNS). The
DNS associates various sorts of information with so-called domain names; most importantly, it
serves the Internet by translating human-readable computer hostnames into the IP address,
information that the networking equipment needs to deliver.Dnsendpt1 contains two targets -
remotesap1
and
remotesap2
. The supported properties of dnsendpt1 are as follows:
8.11.1
Supported Properties
The supported properties of the target
dnsendpt1
are as follows:
