SMASH
–
Lite* Interface
(System Management Architecture for Server Hardware* by AMI*)Intel® Remote Management Module 3 User Guide
Revision 1.3
74
Figure 62: IPENDPT1 Target
8.10
Remotesap1
The
remotesap1
target will enumerate all the configurable IPs under the containing target. A
remote access server enables users who are not on a local network to access. This does not
contain any targets.
8.10.1
Supported Properties
The supported properties of the target
remotesap1
are as follows:
Table 28: Remotesap1 - Supported Properties
Property
Task
defaultgatewayaddress
IP address of the gateway. A gateway address is a private address and is the
address to which traffic is sent from the LAN .This is an R/W property. The
value of the gateway can be set as follows:
> Set defaultgatewayaddress =0.0.0.0
Identity
This read only property gives a brief explanation of the present target and
cannot be changed.
8.10.2
Supported Verbs
The supported verbs of the
remotesap1
target are as follows.
