Intel® Server System R2600SR Setup and Service Guide
23
3.1.2
Installing the Compute Node
Figure 13. Installing the compute node
1.
Make sure that the locking lever on the compute node is turned all the way left.
2.
Slide the compute node into the node bay until it stops.
3.
Secure the compute node by turning the locking lever all the way to the right until it clicks into place.
4.
Check the power LED to ensure it transitions between fast blink and slow blink to indicate the node is
ready to be powered on.
The time required for a compute node to initialize varies by system configuration. The power LED flashes
rapidly during initialization; the power button on the compute node does not respond until the power LED
flashes slowly, indicating the initialization process is complete.
Note: If the node configuration has been changed or a different configuration is being installed, configure the
compute node through the <F1> BIOS Setup utility.
3.1.3
Removing the Compute Node Cover
Before removing the compute node cover, perform these steps:
Figure 14. Removing the compute node cover
Summary of Contents for R2600SR Series
Page 2: ...Blank page...
