Intel® Server System R2600SR Setup and Service Guide
14
These parts appear in the illustration below.
Figure 6. Slide box contents
2.2.1
Installing the Rail Kit
To install the rail kit, complete the steps below:
Figure 7. Installing the rear rail
Note: The holes on the front and rear of the rack may be either square or round.
1.
Select the first slide rail to be installed.
2.
Make sure the slide rail is shortened (compressed) to the shortest position.
3.
While standing in front of the rack cabinet, line up the pins on the rear of the slide rail with the flange
holes at the rear of the rack.
4.
Push the slide rail so that the pins and the latch snap into place.
Summary of Contents for R2600SR Series
Page 2: ...Blank page...
