Intel
®
Server System R2000WT Product Family System Integration and Service Guide
17
Intel® Server Chassis R2000WT Configurations
The following Front Panel cable connections apply to all configurations of the Intel® Server Chassis
R2000WTxxx.
This system includes front panel USB, Video, Control Buttons, and various LED features that must be cabled
to the appropriate connectors on the server board. Cables should be routed in the following order: (1) Front
Panel USB, (2) Front Control Panel, and (3) Front Panel Video
Figure 16. R2000WTxxx Front Control Panel and Front I/O Internal Cable Connections
•
Route the Black round USB cable to the Blue 20-pin connector on the server board labeled “Front Panel
USB 2.0/3.0”. The cable should be routed as close to the chassis side wall as possible.
•
Route the folded 30-pin Gray ribbon cable to the matching 30-pin header on the server board labeled
“Front Control Panel”
•
Route the 14-pin Gray folded ribbon cable to the 14-pin black shrouded connector on the server board
labeled “Front Panel Video”
Note: All three front panel cables should be routed benenath the fan assembly receiver feature on the right
chassis sidewall.
Front Panel USB (1)
Front Panel
Video (3)
Front Control Panel (2)
