Intel® Server System R2000WF Product Family Technical Product Specification
81
Figure 57. 12 x 3.5" HSBP connector identification
Multi-port mini-SAS HD cable connectors (connectors A, B, and C)
– The 12 x drive backplane includes
three multi-port mini-SAS cable connectors, each providing SGPIO and I/O signals for four SAS/SATA drives
on the backplane. Cables can be routed from matching connectors on the server board, from add-in
SAS/SATA RAID cards, or from an optionally installed SAS expander card. Each mini-SAS HD connector
includes a silk-screen identifying which drives the connector supports: drives 0-3, drives 4-7, and drives
8-11.
Power harness connector (connector D)
– The backplane includes a 2x2 connector supplying power to the
backplane. Power is routed to the backplane via a power cable harness from the server board
I2C cable connectors (connector E)
– The backplane includes a 1x5 cable connector used as a management
interface to the server board.
PCIe SSD connector (connectors F and G)
– The backplane includes two PCIe OCuLink cable connectors
(labeled PCIe SSD0 and PCIe SSD1), each providing support for one NVMe drive.
6.9
2 x 2.5” Hot Swap Drive Bay Accessory Kit
This section applies to the 2 x 2.5” hot swap drive bay accessory kit (iPC – A2UREARHSDK).
The 2U product family provides the option to support two 6 Gb/sec hot swap SATA SSDs installed to a
modular drive bay mounted in the back of the system.
A
– Ports 8-11 mini-SAS HD cable connector
B
– Ports 4-7 mini-SAS HD cable connector
C
– Ports 0-3 mini-SAS HD cable connector
D
– Power connectors
E
– I2C connector
F
– PCIe* SSD connector SSD0
G
– PCIe* SSD connector SSD1
Summary of Contents for R2000WF series
Page 2: ...Blank page...
