Intel® Server System R2000WF Product Family Technical Product Specification
71
6.2
Hot Swap Drive Carriers
Each SAS/SATA/NVMe* drive that interfaces with a backplane is mounted to a tool-less hot swap drive
carrier.
Drive carriers include a latching mechanism used to assist with drive extraction and drive insertion.
Figure 44. Drive carrier removal
Note
: To ensure proper system air flow requirements, all front drive bays must be populated with a drive
carrier. Drive carriers must be installed with either a drive or supplied drive blank.
There are drive carriers to support 2.5” drives and 3.5” drives. Drive blanks used with the 3.5” drive carrier
can also be used to mount a 2.5” SSD.
Figure 45. 2.5" SSD mounted to 3.5" drive carrier
Summary of Contents for R2000WF series
Page 2: ...Blank page...
