Hardware Installations and Upgrades
Figure 80. Installing the LCP Module
Removing the LCP Module
1.
Disconnect LCP and USB cables from server board (see letter
A
).
2.
Remove the two screws as shown (see letter
B
).
3.
Slide the module out (see letter
C
).
4.
Remove the two screws as shown, slide the front USB header out (see letter
D
).
5.
Install the front video and USB module. For instructions, see
Installing the Front Video and
Intel
®
Server System R2000LH2/LT2 Service Guide
53
