Hardware Installations and Upgrades
Figure 79. Installing the front video and USB Module
Installing and Removing the LCP Module
Before installing or removing the LCP module, please make sure following steps are performed.
1.
Ensure the AC power cord(s) are disconnected from the system.
2.
Remove the system cover. For instructions, see
3.
Remove the power supply modules. For instructions, see
Removing the Power Supply Module(s)
.
4.
Remove the PCI riser assemblies. For instructions, see
Removing the PCI Riser Assembly
5.
Remove the air duct. For instructions, see
Installing the LCP Module
1.
Remove the front video and USB module. For instructions, see
2.
Secure the front USB header to the module with two screws as shown (see letter
A
).
3.
Insert the LCP module into chassis (see letter
B
).
4.
Secure the LCP module to chassis with two screws (see letter
C
).
5.
Install the LCP and USB cables to the server board as shown (see letter
D
).
52
Intel
®
Server System R2000LH2/LT2 Service Guide
