Intel R2000LT2, Service Manual

Page: 57 / 83

Hardware Installations and Upgrades
2. Remove the system cover. For instructions, see Removing the System Cover .
3. Remove the power supply modules. For instructions, see Removing the Power Supply Module(s) .
4. Remove the PCI riser assemblies. For instructions, see Removing the PCI Riser Assembly .
5. Remove the air duct. For instructions, see Removing the Air Duct .
6. Remove the processor heatsink(s). For instructions, see Removing Processor Heatsink(s) .
7. Remove the processor(s). For instructions, see Installing or Replacing the Processor .
8. Remove the memory. For instructions, see Removing Memory .
9. Remove all the Intel
®
I/O expansion module(s). For instructions, see Removing Intel
®
I/O Expansion
Module .
10. Remove Intel
®
Remote Management Module 4. For instructions, see Installing and Removing the
Intel
®
Remote Management Module 4 .
Removing the Server Board
1. Disconnect all cables from the server board.
2. Remove the thirteen screws from the server board (see letter A ).
3. Lift the server board from the server system (see letter
B
).
Figure 70. Removing the Server Board
Installing the Server Board
1. Place the server board into the server system (see letter A ).
2. Secure the server board with thirteen screws (see letter
B
).
Intel
®
Server System R2000LH2/LT2 Service Guide 45